Azuro Alkalita plus 0,6 kg

A preparation for increasing the alkalinity and stabilizing the ph of the water in the hot tub. Alkalinity is also referred to as buffering capacity and when maintained in the correct range of 80-120 ppm, it prevents sudden changes in pH values ​​and optimizes the effect of other spa water treatment products. Alkalinity should always be adjusted before measuring and adjusting pH values.

Instructions for use: Before using the product, measure the value of the total alkalinity using the Azuro OXI Wellness&Spa 3in1 strip tester or the Alkalita drop tester. If it is lower than 80 ppm, add Azuro Alkalita Plus and if it is higher than 120 ppm, add Azuro pH minus.

Dosage: To increase alkalinity by 10 ppm, add 18g of Azuro Alkalita Plus to 1 m3 (1,000 l) of water. Dissolve the measured amount of powder in several liters of water and pour the solution into the hot tub while the filter device is operating. Do not increase alkalinity by more than 50 ppm in one step. If more alkalinity adjustment is required, do the next dosing only after sufficient mixing of the water.